PRODUCT RANGE

Widest Range of Printing Inks

Products

Reverse Lamination Ink for Polyester & BOPP

Bopp Tape Gravure Printing Ink

Poly Flexographic Ink

Poly Gravure Printing Ink

Poly Two Pack Printing Ink

Poly Ink for Water & Milk

High Bond Lamination Inks

Waterbase Printing Ink

Foil Heat Resistance Inks

Fabric Tape Pass Cement Ink

HDPE Fertilizer Ink

PVC Shrink Ink

Reverse Lamination Ink for Polyester & BOPP

Printing Process:

Gravure

Printing Substrate:

Normal PET, CC PET

Key Product Features:

Excellent printability & re-solubility
High color strength
Higher bond strength
Low solvent retention
Suitable for speed from 50 M/M to 250 M/M

Properties:

Ink Adhesion	4
Heat Resistance	NA
Gloss	NA
Light Fastness	2 – 7
Water Resistance	NA
Deep Freeze Resistance	NA
Vegetable Oil Resistance	NA
Lamination Bonds	>100gmf / 15mm

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Gravure
Viscosity (In sec by B-4 cup @ 30°C)	15 – 20
Reducer	TOL / EA / MIBK – 45 : 45 : 10
Accelerator	MEK
Retarder	MIBK

Bopp Tape Gravure Printing Ink

Poly Flexographic Ink

Supergloss inks are high strength , high gloss polyamide base ink suitable for many types of Surfaces. Mainly used by carry bag industry. This ink can be applied for most of the application & film where Heat resistance , Laminaton or Ar/Sr properties are not required.

Printing Process:

Gravure / Flexo

Printing Substrate:

Treated PP and PE, PVC, Cellophane, Metallized PVC/BOPP/PET,& Pearl BOPP

Key Product Features:

High Gloss
High print strength
Excellent scuff and nail resistance
Excellent wet and dry rub resistance
Proves as the best adhesion to difficult surfaces
Suitable for speed from 40m/m to 120m/m

Properties:

Ink Adhesion	5
Heat Resistance	80°C
Gloss	4
Light Fastness	2 – 7
Water Resistance	2
Deep Freeze Resistance	2
Vegetable Oil Resistance	2
Lamination Bonds	NA

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Flexographic	Gravure
Viscosity (In sec by B-4 cup @ 30°C)	25 – 30	15 – 20
Reducer	Butanol	TOL : IPA 80 : 20
Accelerator	IPA	IPA
Retarder	N-Propanol	NBA

Poly Gravure Printing Ink

Multi Gloss Inks are normal Polyamide base ink used for various surfaces.. This polyamide based ink is highly suitable for printing on various films as well as for general purpose, shopping bags along with twist wrappers.

Printing Process:

Gravure / Flexo

Printing Substrate:

TTreated PP and PE, PVC, Cellophane, Metallized PVC/BOPP/PET, Pearl BOPP

Key Product Features:

High level of printing ability & re-solubility
Good color strength
Perfect wet and dry rub resistance
Scuff & nail resistance
40m/m to 120m/m speed suitability

Properties:

Ink Adhesion	5
Heat Resistance	80°C
Gloss	4
Light Fastness	2 – 7
Water Resistance	2
Deep Freeze Resistance	2
Vegetable Oil Resistance	2
Lamination Bonds	NA

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Flexographic	Gravure
Viscosity (In sec by B-4 cup @ 30°C)	25 – 30	15 – 20
Reducer	Butanol	TOL : IPA 80 : 20
Accelerator	IPA	IPA
Retarder	N-Propanol	NBA

Poly Two Pack Printing Ink

We are offering a wide range of Poly Two Pack Ink that is a polyamide based ink suitable for printing on various films. Generally, used in rotogravure process, these inks are extensively used for soap, detergent and oil packing as well as for treated PP and PE. These inks have similar attributes like multi gloss ink but also have an added advantage of soap, alkali, acid and oil resistance.

Printing Process:

Gravure

Printing Substrate:

Treated PP and PE

Key Product Features:

Alkylic and soap resistance
Oil Resistance property
Good water resistance
Good printability
Perfect re-solubility
Accurate color strength
Wet and dry rub resistance
Scuff and nail resistance

Properties:

Ink Adhesion	5
Heat Resistance	80°C
Gloss	4
Light Fastness	2 – 7
Water Resistance	3
Deep Freeze Resistance	3
Vegetable Oil Resistance	5
Lamination Bonds	NA
AR/SR (After additive addition)	5

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Gravure
Viscosity (In sec by B-4 cup @ 30°C)	15 – 20
Reducer	TOL / IPA – 4 / 1
Accelerator	IPA
Retarder	Butanol

Poly Ink for Water & Milk

Poly Deep freeze inks are Polyamide base ink suitable for deep freeze & water resistance packaging. It is also suitable for industrial packaging. It is mainly used for milk & water packaging.

Printing Process:

Gravure

Printing Substrate:

Treated LDPE

Key Product Features:

Good Milk and fat resistance
Water Resistance
Moderate Chemical & Oil resistance
Excellent printability and re-solubility
High color strength
Excellent Wet and dry rub resistance
Excellent Scuff and nail resistance
Suitable for speed from 40m/m to 120m/m

Properties:

Ink Adhesion	5
Heat Resistance	NA
Gloss	4
Light Fastness	2 – 7
Water Resistance	5
Deep Freeze Resistance	5
Vegetable Oil Resistance	3
Lamination Bonds	NA

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Gravure
Viscosity (In sec by B-4 cup @ 30°C)	15 – 20
Reducer	TOL/ISO Propyl Alcohol – 4/1
Accelerator	IPA
Retarder	NBA

High Bond Lamination Inks

Superlam PU inks are based on Polyurethane resin.These Polyurethane inks are generally used for reverse printed lamination application on flexible films. Moreover, these find application in flexible packaging for confectionery and general purpose product pouches printed on different types of flexible substrate. Along with that, these are also used for liquid packaging like shampoo sachets, oil pouches.

Suitable for solvent based, solvent less adhesives and extrusion lamination; these inks can be utilized in rotogravure printing process for printing over normal PET, CT PET, CC PET, treated BOPP (PCT / HST), nylon, PVDC coated film and PT Cellophane.

Printing Process:

Gravure

Printing Substrate:

Normal PET, CT PET, CC PET, Treated BOPP (PCT / HST), Nylon, PVDC coated film, PT Cellophane

Key Product Features:

Lesser solvent retention
Good bond strength
Perfect printability & resolubility
Perfect color strength
Versatile ink for all types of polyester & BOPP
Suitable for speed from 100 m/m to 350 m/m

Properties:

Ink Adhesion	4
Heat Resistance	NA
Gloss	NA
Light Fastness	2 – 7
Water Resistance	NA
Deep Freeze Resistance	NA
Vegetable Oil Resistance	NA
Lamination Bonds	>100gmf/15mm

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Gravure
Viscosity (In sec by B-4 cup @ 30°C)	15 – 20
Reducer	MEK / TOL / IPA – 2/ 2 / 1
Accelerator	MEK
Retarder	MIBK

Waterbase Printing Ink

We are offering Water base Paper ink that is suitable for printing on various types of paper and boards. Mainly used in flexo printing process, these inks find application for general purpose, corrugated cartons and paper bags. These inks are highly appreciated for resistance to heat, weather proof, excellent color strength and brilliant printability.

Printing Process:

Flexo

Printing Substrate:

Paper (Coated and Un coated), Kraft paper

Key Product Features:

Good ink transfer
Rapid drying
High color strength
Good opacity

Properties:

Ink Adhesion	5
Heat Resistance	NA
Gloss	3
Light Fastness	2 – 7
Water Resistance	4
Deep Freeze Resistance	4
Vegetable Oil Resistance	NA
Lamination Bonds	NA

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Gravure
Viscosity (In sec by B-4 cup @ 30°C)	20 – 25
Reducer	MWater
Accelerator	IPA
Retarder	Glycols

Foil Heat Resistance Inks

We formulate and offer a quality range of Foil HR inks that is processed using quality raw material to make it in accordance with the industry standards. These inks are extensively used for surface printed application for their heat resistance attributes. Our offered ink is highly suitable for surface printing aluminum foil and NC based surface printing application.

Widely used for gravure & flexo printing process in pharmaceutical, paper bags, chocolate and food wrapper and laminate pouches (coated polyester only) industries; these inks are highly appreciated by our clients. Suitable for blister foil, normal foil, chromo paper, glassine, metalized paper and CC pet; we also have capability to customize these inks are per the requirements of our clients.

Printing Process:

Gravure & Flexo

Printing Substrate:

Blister foil, Normal foil, Chromo paper, Glassine, Metallized paper, CC PET

Key Product Features:

High resistance to heat and can provide resistance up to 190 degree
Celsius of heat Generates soft film on the foil surface without any crack
Very low solvent retention
This particular array of ink is utilized in the packaging of many products hence making it an indispensable part of the packaging industry
Excellent printability and re-solubility
High color strength
Excellent scuff resistance
Suitable for speed from 50 m/m to 350 m/m

Properties:

Ink Adhesion	5
Heat Resistance	180 – 220°C
Gloss	4
Light Fastness	2 – 7
Water Resistance	3
Deep Freeze Resistance	4
Vegetable Oil Resistance	3
Lamination Bonds	NA

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Flexographic	Gravure
Viscosity (In sec by B-4 cup @ 30°C)	25 – 30	15 – 20
Reducer	Ethyl Alcohol/Methoxy propanol – 4/1	Ethyl Acetate – 1/1
Retarder	Ethoxy Propanol or Methoxy Propanol	Cellosolve

Fabric Tape Pass Cement Ink

We are offering PP Woven Tape Ink that is extensively used in printing of packaging material in cement & fertilizer industries. It is a specially formulated ink that is tested through scotch tape test on untreated PP fabric, with very high gloss & scuff resistance. Normally cement bags are printed with this ink. It is mainly used for surface printed application on PP woven sacks and for roll to bag and bag to bag printing. Generally used in flexo printing process, these inks are ideal for untreated and treated PP.

Printing Process:

Flexo

Printing Substrate:

Untreated and Treated PP

Key Product Features:

Immediate adhesion on treated and un-treated substrate
Good printability and re-solubility
High color strength
Good nail and scuff resistance

Properties:

Ink Adhesion	3
Heat Resistance	NA
Gloss	3
Light Fastness	2 – 7
Water Resistance	NA
Deep Freeze Resistance	NA
Vegetable Oil Resistance	NA
Lamination Bonds	3

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Flexographic
Viscosity (In sec by B-4 cup @ 30°C)	20 – 25
Reducer	**
Accelerator	Recommended Reducer of RRL
Retarder	Recommended Reducer of RRL

HDPE Fertilizer Ink

We are engaged in manufacturing and exporting of wide range of HDPE AR/ UR Ink that is used for surface printed application on HDPE woven sacks specially for fertilizer grade packing, suitable for roll to bag and bag to bag printing. The printing on the bags is done using these printing inks through flexographic printing technology. We have formulated these inks using quality raw material to make these in compliance with industry standards.

Printing Process:

Flexo

Printing Substrate:

Untreated and Treated HDPE

Key Product Features:

Fertilizer & urea resistance
Moderate chemical resistance
Good printability and re-solubility
High color strength
Immediate adhesion on treated and un-treated substrate HDPE
Good nail and scuff resistance

Properties:

Ink Adhesion	3
Heat Resistance	NA
Nail and Scuff Resistance	3
Gloss	3
Light Fastness	2 – 7
Water Resistance	NA
Deep Freeze Resistance	NA
Vegetable Oil Resistance	NA
Lamination Bonds	NA

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Flexographic
Viscosity (In sec by B-4 cup @ 30°C)	20 – 25
Reducer	Recommended Reducer of RRL
Retarder	Recommended Reducer of RRL

PVC Shrink Ink

Our organization is offering a quality array of PVC Shrink Ink that is extensively used in packaging industry. Mainly used for reverse printed non lamination application on flexible films, this Aryalic based reverse ink is suitable for non lamination application on flexible films. The flexible packaging for confectionary and general purpose product shrink sleeves is printed utilizing gravure printing process on shrink PVC.

Printing Process:

Gravure

Printing Substrate:

Shrink PVC

Key Product Features:

Brilliant ink adhesion Easily shrinkable for uniform printing effect after shrinkage
Brilliant printability
Exceptional color strength
Excellent printability and re-solubility
Suitable for speed from 50 m/m to 250 m/m

Properties:

Ink Adhesion	4
Heat Resistance	NA
Gloss	NA
Light Fastness	2 – 7
Water Resistance	4
Deep Freeze Resistance	4
Vegetable Oil Resistance	3
Lamination Bonds	NA
AR/SR	NA

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Print Viscosity	Gravure
Viscosity (In sec by B-4 cup @ 30°C)	15 – 20
Reducer	EA
Accelerator	EA
Retarder	EA

Generate Enquiry

Enquiry

Widest Range of Printing Inks

Printing Process:

Gravure

Printing Substrate:

Normal PET, CC PET

Key Product Features:

Properties:

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Some of the attributes of BOPP Tape Grade Ink are:

Printing Process:

Gravure / Flexo

Printing Substrate:

Treated PP and PE, PVC, Cellophane, Metallized PVC/BOPP/PET,& Pearl BOPP

Key Product Features:

Properties:

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Printing Process:

Gravure / Flexo

Printing Substrate:

TTreated PP and PE, PVC, Cellophane, Metallized PVC/BOPP/PET, Pearl BOPP

Key Product Features:

Properties:

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Printing Process:

Gravure

Printing Substrate:

Treated PP and PE

Key Product Features:

Properties:

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Printing Process:

Gravure

Printing Substrate:

Treated LDPE

Key Product Features:

Properties:

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Printing Process:

Gravure

Printing Substrate:

Normal PET, CT PET, CC PET, Treated BOPP (PCT / HST), Nylon, PVDC coated film, PT Cellophane

Key Product Features:

Properties:

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications:

Printing Process:

Flexo

Printing Substrate:

Paper (Coated and Un coated), Kraft paper

Key Product Features:

Properties:

Rating Scale:

1 = Lowest; 5 = Highest

Note:

All resistance properties are guideline only and dependent on pigment and substract selection

Specifications: